| Issue ID | 810134 |
| Internal NHTSA # | 10350178 |
| Manufacurer | TOYOTA MOTOR CORPORATION |
| Brand | TOYOTA |
| Model | TUNDRA |
| Model Year | 2004 |
| File date | 10/08/10 |
| Component | ELECTRICAL SYSTEM |
| Product type code | VEHICLE |
| Description of the problem | Column shifter overdrive on/off switch wire leads in 2004 toyota tundra fails or shorts out causing loss of control of overdrive setting on automatic transmission. This can cause downshifting at highway speed or your vehicle to not shift into overdrive causing poor fuel economy problem occurs after so many shift cycles of the column shifter from park to drive cause the wire leads to break from metal fatigue causing the failure or short in the switch my truck started this with about 123,000 miles on it. I found numerous posts on the web detailing the fix on this problem. Upon investigation i found the routing of the wires is causing the issue and you can see where toyota has tried to tape the wires to give extra protection in a poor routing of the switch wires. |
| Vehicle Mileage at Failure | 123000 |
| Number of Occurences | 1 |
| Source of the issue | NHTSA WEB SITE |
| City and State | SMYRNA, TN |
| VIN pattern | 5TBDT44124SXXXXXX |
| Was vehicle invloved in a crash? | N |
| Was vehicle involved in a fire? | N |
| Was incedent reported to police? | N |
| Was medical attention required? | |
| Was part original equipment? | |
| No. of injured persons | |
| No. of fatalities | |
| Date of purchase | 07/08/26 |
| Was original owner? | N |
| Anti-lock brakes | N |
| Cruise control | N |
| Number of cylinders | |
| Drive train type | |
| Transmission type | |
| Vehicle speed | 0 |
| DoT tire identifier | |
| Tire size | |
| Location of tire code | |
| Type of tire failure code | |
| Was defective tire repaired? | |
| Date of manufacture | |
| Type of child seat code | |
| Type of restraint | |
| Dealer's name | |
| Dealer's telephone number | |
| Dealer's city | |
| Dealer's state code | |
| Dealer's ZIP code |