| Issue ID | 1524381 |
| Internal NHTSA # | 11163287 |
| Manufacurer | Nissan North America, Inc. |
| Brand | NISSAN |
| Model | MURANO |
| Model Year | 2017 |
| File date | 20/11/18 |
| Component | POWER TRAIN |
| Product type code | VEHICLE |
| Description of the problem | When making sharp turn (left or right) into fast moving traffic and driving straight after the turn, while pushing accelerator pedal hard, the rpm will go up high but the speed will not (it will increase very slowly). The rpm would stay high (5000 to 6000) there will be lots of noise from the drive train but nothing will happen to lower the rpm. In order to make the cvt work properly after that, the accelerator pedal has to be fully released and the rpm will have to go down. I can replicate this condition most of the time (it depends on whether the accelerator pedal is pushed hard enough while turning), and it has been happening ever since purchase of this car. At the dealership garage i was told that since there is no fault code they can't help and refused to take a ride in the car. |
| Vehicle Mileage at Failure | 200 |
| Number of Occurences | |
| Source of the issue | NHTSA WEB SITE |
| City and State | JUSTICE, IL |
| VIN pattern | 5N1AZ2MH3HNXXXXXX |
| Was vehicle invloved in a crash? | N |
| Was vehicle involved in a fire? | N |
| Was incedent reported to police? | N |
| Was medical attention required? | N |
| Was part original equipment? | |
| No. of injured persons | |
| No. of fatalities | |
| Date of purchase | 07/08/26 |
| Was original owner? | N |
| Anti-lock brakes | N |
| Cruise control | N |
| Number of cylinders | |
| Drive train type | |
| Transmission type | |
| Vehicle speed | 50 |
| DoT tire identifier | |
| Tire size | |
| Location of tire code | |
| Type of tire failure code | |
| Was defective tire repaired? | |
| Date of manufacture | |
| Type of child seat code | |
| Type of restraint | |
| Dealer's name | |
| Dealer's telephone number | |
| Dealer's city | |
| Dealer's state code | |
| Dealer's ZIP code |