| Issue ID | 1597234 |
| Internal NHTSA # | 11252717 |
| Manufacurer | Nissan North America, Inc. |
| Brand | NISSAN |
| Model | ALTIMA |
| Model Year | 2012 |
| File date | 01/09/19 |
| Component | VEHICLE SPEED CONTROL |
| Product type code | VEHICLE |
| Description of the problem | This was a used pre-certified car, purchased from the dealer in which did not have any issues until its warranty was practically no longer valid. The cars electrical system started to have issues. The issues with the electrical system started with the usb port connection to a cellular device. Sometimes the car will recognize the phone, other times i have to disconnect the usb to phone connection, turn the usb cord around and reconnect a few times for the radio to recognize the phone. After this issues, one speaker went out. Later on, a second speaker went out. I replaced both speakers to find out that it is possible the in-car amplifier blew. After this, the radio unit would at times go completely black, causing me to have to turn the car off and back on. After this, the driver side door no longer locks electronically, i have to lock and unlock driver side door manually but the passenger side does indeed work. After these issues, i noticed the check engine light had come on for a mass air flow sensor. I cleaned the sensor, and the engine light went away. About 300 miles later, it came back on and the car hesitates/bucks consistently with a loss of power once the speed hits about 60 mph. I-75 hills, i can no longer accelerate to maintain speeds. I replaced the maf sensor, check engine light is still on. I had it cleared from o'reilly's since the same code was appearing on the car. After 10 miles sitting in idle, the traction control sensor appeared. 10 miles afterwards this on i-75, the car will not climb hills, drops power, bucks and jerks the car forward and back. I stopped at a part store, turn the car off and back on. Traction control sensor goes away, engine light comes back on with same code reading. I cleaned the throttle body, check engine light is still on. I've read a lot of articles about this, no one has figured out how to fix this. |
| Vehicle Mileage at Failure | 100000 |
| Number of Occurences | |
| Source of the issue | NHTSA WEB SITE |
| City and State | CHATTANOOGA, TN |
| VIN pattern | 1N4BL2EP7CCXXXXXX |
| Was vehicle invloved in a crash? | N |
| Was vehicle involved in a fire? | N |
| Was incedent reported to police? | N |
| Was medical attention required? | N |
| Was part original equipment? | |
| No. of injured persons | |
| No. of fatalities | |
| Date of purchase | 07/08/26 |
| Was original owner? | N |
| Anti-lock brakes | N |
| Cruise control | N |
| Number of cylinders | |
| Drive train type | |
| Transmission type | |
| Vehicle speed | 60 |
| DoT tire identifier | |
| Tire size | |
| Location of tire code | |
| Type of tire failure code | |
| Was defective tire repaired? | |
| Date of manufacture | |
| Type of child seat code | |
| Type of restraint | |
| Dealer's name | |
| Dealer's telephone number | |
| Dealer's city | |
| Dealer's state code | |
| Dealer's ZIP code |