| Issue ID | 953385 |
| Internal NHTSA # | 10486682 |
| Manufacurer | Ford Motor Company |
| Brand | LINCOLN |
| Model | MKX |
| Model Year | 2010 |
| File date | 01/12/12 |
| Component | SEATS |
| Product type code | VEHICLE |
| Description of the problem | I am not sure if this is the right place to present this issue, but will explain my concern here. I have an issue with the location of the driver's seat location in my lincoln mkx. I am 6'2" tall and have long legs. I have had a knee replacement which left me with reduced range of motion in my leg. My issue is that i cannot straighten my leg out enough to be comfortable while driving due to the limited rearward motion of the seat. In speaking with the service manager at the dealer where i purchased the vehicle, he suggested that i contact ford/lincoln directly. In doing so, they advised that contact you people at this e-mail address. It is my intention to point out this matter to you and seek some advice and direction. My proposal is to raise the seat height approximately 3" and add a piece of flat metal under the seat track which could be redrilled to allow the seat to move rearward approximately 3+". These modifications would use the same holes in the seat track and the attachment locations in the floor that exist now. Any replacement bolts that would be used would of equal grade of the original bolts. This modification would allow me to sit higher and further back from the brake and gas pedals while allowing my leg to be straighter, therefore more comfortable. I have seen this type of modification done on other vehicles and it works. If done properly it would not alter the level of safety in the vehicle. At this point ford/lincoln will not support this modification without my presenting the idea to you people for your support on the modification. If you could review this request and advise me on this matter by return e-mail, i would appreciate it. |
| Vehicle Mileage at Failure | 29000 |
| Number of Occurences | 1 |
| Source of the issue | NHTSA WEB SITE |
| City and State | LYMAN, ME |
| VIN pattern | 2LMDJ8JC8ABXXXXXX |
| Was vehicle invloved in a crash? | N |
| Was vehicle involved in a fire? | N |
| Was incedent reported to police? | N |
| Was medical attention required? | |
| Was part original equipment? | |
| No. of injured persons | 0 |
| No. of fatalities | 0 |
| Date of purchase | 07/08/26 |
| Was original owner? | N |
| Anti-lock brakes | N |
| Cruise control | N |
| Number of cylinders | 6 |
| Drive train type | |
| Transmission type | |
| Vehicle speed | 0 |
| DoT tire identifier | |
| Tire size | |
| Location of tire code | |
| Type of tire failure code | |
| Was defective tire repaired? | |
| Date of manufacture | |
| Type of child seat code | |
| Type of restraint | |
| Dealer's name | |
| Dealer's telephone number | |
| Dealer's city | |
| Dealer's state code | |
| Dealer's ZIP code |