| Issue ID | 1350272 |
| Internal NHTSA # | 10946496 |
| Manufacurer | Chrysler (FCA US LLC) |
| Brand | JEEP |
| Model | WRANGLER |
| Model Year | 2013 |
| File date | 05/11/16 |
| Component | ENGINE |
| Product type code | VEHICLE |
| Description of the problem | My check engine light illuminated and the engine was running rough, possible loss of power. Per jeep / chrysler / dodge / ram / mopar technical service bulletin 18-034-14 rev. A and tsb-18-034-14 on some model vehicles and jeeps, (my 2013-2014) the malfunction indicator lamp (mil) illuminates and diagnostic trouble code (dtc) p0520 is set regarding engine oil pressure sensor circuit. The tsb outlines replacing the oil pressure sensor with a "revised" part. Chrysler installed defective sensors on many 2013-2014 3. 6l engines and will only replace them if they fail while under warranty. If the oil pressure sensor is malfunctioning, it may not alert you to an issue with oil pressure. This can cause engine failure and potential to cause an accident due to engine failure / loss of power. |
| Vehicle Mileage at Failure | 48000 |
| Number of Occurences | |
| Source of the issue | NHTSA WEB SITE |
| City and State | PROSPECT, CT |
| VIN pattern | XXXXXX |
| Was vehicle invloved in a crash? | N |
| Was vehicle involved in a fire? | N |
| Was incedent reported to police? | N |
| Was medical attention required? | N |
| Was part original equipment? | |
| No. of injured persons | |
| No. of fatalities | |
| Date of purchase | 07/08/26 |
| Was original owner? | N |
| Anti-lock brakes | N |
| Cruise control | N |
| Number of cylinders | |
| Drive train type | |
| Transmission type | |
| Vehicle speed | 0 |
| DoT tire identifier | |
| Tire size | |
| Location of tire code | |
| Type of tire failure code | |
| Was defective tire repaired? | |
| Date of manufacture | |
| Type of child seat code | |
| Type of restraint | |
| Dealer's name | |
| Dealer's telephone number | |
| Dealer's city | |
| Dealer's state code | |
| Dealer's ZIP code |