| Issue ID | 1355506 |
| Internal NHTSA # | 10954004 |
| Manufacurer | Chrysler (FCA US LLC) |
| Brand | JEEP |
| Model | WRANGLER |
| Model Year | 2010 |
| File date | 10/08/16 |
| Component | POWER TRAIN |
| Product type code | VEHICLE |
| Description of the problem | Jeep will not hold first gear in. Every time it is put into first gear, the shifter is kicked out. The clutch was pushed in completely when put into gear and the problem still occurs. The issue usually happens at about 5 mph and below and sometimes when completely stopped. This issue has nearly caused multiple accidents due to the inability to be able accelerate as needed. One of the "solutions" is to use second gear to take off and completely bypass the first gear which will speed up the wear on the clutch causing premature replacement. |
| Vehicle Mileage at Failure | 81000 |
| Number of Occurences | |
| Source of the issue | NHTSA WEB SITE |
| City and State | FARGO, ND |
| VIN pattern | 1J4AA2D13ALXXXXXX |
| Was vehicle invloved in a crash? | N |
| Was vehicle involved in a fire? | N |
| Was incedent reported to police? | N |
| Was medical attention required? | N |
| Was part original equipment? | |
| No. of injured persons | |
| No. of fatalities | |
| Date of purchase | 07/08/26 |
| Was original owner? | N |
| Anti-lock brakes | N |
| Cruise control | N |
| Number of cylinders | |
| Drive train type | |
| Transmission type | |
| Vehicle speed | 5 |
| DoT tire identifier | |
| Tire size | |
| Location of tire code | |
| Type of tire failure code | |
| Was defective tire repaired? | |
| Date of manufacture | |
| Type of child seat code | |
| Type of restraint | |
| Dealer's name | |
| Dealer's telephone number | |
| Dealer's city | |
| Dealer's state code | |
| Dealer's ZIP code |