| Issue ID | 1051045 |
| Internal NHTSA # | 10575041 |
| Manufacurer | Chrysler Group LLC |
| Brand | JEEP |
| Model | GRAND CHEROKEE |
| Model Year | 2010 |
| File date | 21/03/14 |
| Component | STRUCTURE:BODY |
| Product type code | VEHICLE |
| Description of the problem | After a minor accident, i took my car to the authorized service centre of the local dealer for the rear bumper replacement. I was in the workshop while the technicians were removing the damaged bumper of my car. When they have removed the bumper completely, i have noticed that there was a rectangular flexible patch attached on the side surface of my vehicle's body by some kind of adhesive. The size of the patch was approximately 150 mm x 300 mm x 2 mm (including the adhesive layer) and it's location was on the rear right hand side of the vehicle body. This patch was out of sight when the bumper was installed. The patch was being used to close a rectangular hole which was extending in to the passenger cabin. This hole was approximately 20 cm above the exit of the exhaust tailpipe. Because of it's location, it is very likely for the hole to be exposed to exhaust emissions directly. The patch closing the hole didn't seem to be so strong. This self adhesive patch must be under the action of vibrations and the diversity of environmental conditions all the time. So, this situation is likely to cause serious. And fatal risks for the passengers as a result of the exhaust gases entry in to the cabin incase the patch is torn or damaged somehow. I have informed the service authorities about the situation and they told me that there were two symmetrically located holes which were machined for the cabin air extractors but their designers preferred to use only one extractor for each vehicle. The unused hole was closed by a self adhesive patch. I believe that this serious defect must be investigated for possible modes of failure and consequences. |
| Vehicle Mileage at Failure | 49800 |
| Number of Occurences | 1 |
| Source of the issue | NHTSA WEB SITE |
| City and State | ANKARA, WA |
| VIN pattern | 1J4RC5GM4AYXXXXXX |
| Was vehicle invloved in a crash? | Y |
| Was vehicle involved in a fire? | N |
| Was incedent reported to police? | N |
| Was medical attention required? | |
| Was part original equipment? | |
| No. of injured persons | 0 |
| No. of fatalities | 0 |
| Date of purchase | 07/08/26 |
| Was original owner? | N |
| Anti-lock brakes | N |
| Cruise control | N |
| Number of cylinders | |
| Drive train type | |
| Transmission type | |
| Vehicle speed | 0 |
| DoT tire identifier | |
| Tire size | |
| Location of tire code | |
| Type of tire failure code | |
| Was defective tire repaired? | |
| Date of manufacture | |
| Type of child seat code | |
| Type of restraint | |
| Dealer's name | |
| Dealer's telephone number | |
| Dealer's city | |
| Dealer's state code | |
| Dealer's ZIP code |