Issue ID | 339246 |
Internal NHTSA # | 757215 |
Manufacurer | DAIMLERCHRYSLER CORPORATION |
Brand | DODGE |
Model | RAM 1500 |
Model Year | 2001 |
File date | 14/01/02 |
Component | POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT |
Product type code | VEHICLE |
Description of the problem | Per dealer service advisor, my trucks wheel sub-assembly was damaged from an over-torqued center nut (during manufacture assembly). This condition caused the bearings to seize and superheat, they have been cutting into the axle and the heat expansion caused the brakes to fail (locked on, but steering has not been pulling). Parts needing replacement include: axle; caliper; hub and bearings; rotor; center nut; center cap. |
Vehicle Mileage at Failure | |
Number of Occurences | 1 |
Source of the issue | NHTSA WEB SITE |
City and State | WALNUT, CA |
VIN pattern | 1B7HC16X61SXXXXXX |
Was vehicle invloved in a crash? | |
Was vehicle involved in a fire? | N |
Was incedent reported to police? | N |
Was medical attention required? | |
Was part original equipment? | |
No. of injured persons | 1 |
No. of fatalities | 0 |
Date of purchase | 01/03/01 |
Was original owner? | Y |
Anti-lock brakes | N |
Cruise control | N |
Number of cylinders | |
Drive train type | RWD |
Transmission type | |
Vehicle speed | |
DoT tire identifier | |
Tire size | |
Location of tire code | |
Type of tire failure code | |
Was defective tire repaired? | |
Date of manufacture | |
Type of child seat code | |
Type of restraint | |
Dealer's name | |
Dealer's telephone number | |
Dealer's city | |
Dealer's state code | |
Dealer's ZIP code |