Issue ID | 1094025 |
Internal NHTSA # | 10618018 |
Manufacurer | Nissan North America, Inc. |
Brand | INFINITI |
Model | JX35 |
Model Year | 2013 |
File date | 12/08/13 |
Component | SERVICE BRAKES |
Product type code | VEHICLE |
Description of the problem | August 2013 - when pressing the on the brake pedal to stop the vehicle,it will continue to move and the brake pedal will go down to the floor but it would not break and the seat belt tightens and almost rear ended the front car. I took the car to the infiniti dealer and they replaced the master cylinder and blend system. The same problem happened again in july 2014, ran through a red light due to break pedal going to the floor and would not brake and the seat belt got tighter. Took the car to infiniti dealer replaced master cylinder and brake booster. I filled a complained to inifiniti motors, since i'm worried there might be a problem causing brake failure. |
Vehicle Mileage at Failure | 17000 |
Number of Occurences | 1 |
Source of the issue | NHTSA WEB SITE |
City and State | OCALA, FL |
VIN pattern | 5N1AL0MM1DCXXXXXX |
Was vehicle invloved in a crash? | N |
Was vehicle involved in a fire? | N |
Was incedent reported to police? | N |
Was medical attention required? | N |
Was part original equipment? | |
No. of injured persons | 0 |
No. of fatalities | 0 |
Date of purchase | 13/02/25 |
Was original owner? | N |
Anti-lock brakes | N |
Cruise control | N |
Number of cylinders | |
Drive train type | |
Transmission type | |
Vehicle speed | |
DoT tire identifier | |
Tire size | |
Location of tire code | |
Type of tire failure code | |
Was defective tire repaired? | |
Date of manufacture | |
Type of child seat code | |
Type of restraint | |
Dealer's name | |
Dealer's telephone number | |
Dealer's city | |
Dealer's state code | |
Dealer's ZIP code |